Skip to main content

How to Fix the Alignment on a Car

How to Fix the Alignment on a Car


Co-authored by Derek Spohn, Master Mechanic
Updated: March 29, 2019
Explore this ArticlePreparing to MeasureMeasuring Your ToeMeasuring Your CamberShow 1 more...Article SummaryQuestions & AnswersRelated ArticlesReferences
Proper wheel alignment is crucial to responsive steering and to getting the longest life out of your tires. If your car is showing uneven or unusually rapid tire wear, is pulling to one side or vibrating when you drive, or if your steering column doesn't seem straight, there's a good chance your wheels are out of alignment. Using the following steps, you can diagnose common alignment problems with your car and correct the most common one, front-end alignment issues, at home.

Part1
Preparing to Measure

  1. Image titled Fix the Alignment on a Car Step 1
    1
    Check your tire pressure. Your tires should be appropriately and evenly inflated before you proceed.
    • Tires that are not properly inflated may actually be the cause of your performance issues, so it's a good idea to check this first. You may not need to do anything else.
    • Additionally, having your tires inflated properly is important for getting accurate reads on the measurements you'll be taking later.
  2. Image titled Fix the Alignment on a Car Step 2
    2
    Check your specifications. Look in your car's repair manual for details about the proper alignment settings. You should find numbers describing the car's ideal toe, camber, and possibly caster.
    • Write these numbers down. You may not know what these numbers mean yet, but don't worry, this will be explained in parts 2 and 3. For now, just make sure you transcribe them accurately.
  3. Image titled Fix the Alignment on a Car Step 3
    3
    Check the front end suspension. If your suspension is loose or any parts have worn out, this may also be the cause of your problems. Like tire-pressure issues, problems with your suspension can also throw off your measurements, so it's important to take care of any issues here first.
    • Drive the car onto a flat area, jack up the front end, and place the car on jack stands. Make sure the steering wheel is unlocked.
    • The easiest way to check the suspension once the car is lifted is to grip each wheel and shake it, both horizontally and vertically. If you don't feel much movement, your suspension is probably in good shape. If not, this may be the source of your problem.[1]
    • If the suspension is loose, you must replace any worn parts. This could include bad ball joints, rack, bushings, gear boxes, tie rod ends, or steering pads.
    • Unless you have experience doing suspension work, you will probably need to take your car to a professional mechanic.

Part2
Measuring Your Toe

  1. Image titled Fix the Alignment on a Car Step 4
    1
    Determine the proper toe. Toe is the amount by which the wheels are closer (toe-in) or further apart (toe-out) at their front edges than at their rear edges, as viewed from above.[2]Depending on your car, your manual will probably recommend either zero toe (equal distance between the front and back) or slight toe-in, which increases stability.[3]
    • Toe is the source of most alignment problems, and the easiest to correct yourself.[4]
  2. Image titled Fix the Alignment on a Car Step 5
    2
    Draw a line. With the car still up on the jack, hold a pocketknife, thin piece of chalk, or white pencil against the center of tire tread. Hold your hand very still and have an assistant turn the tire one full turn, creating a line around the circumference. Do the same on the other side.
    • If there is no area on the tire where the tread is flat, you may need to suspend your marking tool with a clamp or similar stabilizer.[5]
  3. Image titled Fix the Alignment on a Car Step 6
    3
    Lower the car. After you lower the car to the ground, push down on the car above each wheel a few times to allow the car to settle.
  4. Image titled Fix the Alignment on a Car Step 7
    4
    Roll the car. Push the car forward at least 10 feet with the steering wheel unlocked to make sure the wheels are straight.
  5. Image titled Fix the Alignment on a Car Step 8
    5
    Stretch a string. With an assistant, take a piece of string or wire and stretch it between the lines on the front of the tires, even with the spindle, and measure the distance on the string. Repeat at the process at the back of each tire.
    • As long as you use string or wire that does not stretch, you can get a very accurate measurement this way.[6]
  6. Image titled Fix the Alignment on a Car Step 9
    6
    Subtract the differences. If the distance in the front is smaller than in the back, your wheels toe-in. If the measurement in the back is smaller, they toe-out. If they are identical, you have zero toe.[7]
    • Rear toe is also important for control and tire life. It is also important to have your front and rear wheels aligned with one another (e.g. parallel).[8] You can measure your rear toe similarly to the front. If your rear toe is out of alignment, you may need to see a professional mechanic. Rear toe should be adjusted before front toe, so if you find a problem with the rear, don't waste time adjusting the front yourself.[9]

Part3
Measuring Your Camber

  1. Image titled Fix the Alignment on a Car Step 10
    1
    Determine the right camber. Camber is the vertical angle of the wheels when looking at the car head on.[10] Wheels that are closer together at the top are considered to have "negative" camber, those closer together at the bottom have "positive" camber.Depending on your car, the manual will probably recommend slight negative camber, as this increases stability.
  2. Image titled Fix the Alignment on a Car Step 11
    2
    Cut a measuring triangle. Get a piece of stiff cardboard or wood and cut it into a perfect right triangle (one with a 90 degree angle) that is the same height as your wheels.
  3. Image titled Fix the Alignment on a Car Step 12
    3
    Place the triangle. Starting in the front of the car, put the base of the triangle on the ground, perpendicular to the car, and the other side of the 90 degree angle against the center of one of the wheels.[11]
  4. Image titled Fix the Alignment on a Car Step 13
    4
    Take your measurement. There will be a gap between your measuring device and your tire, probably at the top. Measure this with a ruler or calipers. This is your camber.[12]
    • Repeat with the other front wheel. The two wheels should be about the same and within the range specified by your manual. If not, your camber may need alignment. Repeat the process in the back.
    • If you think the camber is off, move your car forward or backward enough to spin the tires half a turn, then try measuring again.[13]
    • Problems with camber, front or rear, can affect how your car handles.[14]. At the same time, however, unless your car has been in a serious accident, it is unlikely that your camber will be seriously out of alignment.[15] If your camber does need to be corrected, it should be done before adjusting the toe.[16]
    • Camber cannot typically be corrected at home with ordinary tools,[17] and indeed, for some cars it cannot be adjusted at all without bending or replacing major parts.[18] Unless you have experience with automotive repair and professional tools, do not try to adjust this yourself.

Part4
Correcting Your Toe

  1. Image titled Fix the Alignment on a Car Step 14
    1
    Locate your tie rod ends. The tie rods are the connection between your steering system and your wheels. The rod ends are L-shaped parts sometimes found near the inside of the wheel.
    • It's a good idea to look at your car's manual and/or at some pictures on the internet to get a sense of what tie rod ends look like and where exactly they are located on your specific car.
  2. Image titled Fix the Alignment on a Car Step 15
    2
    Loosen the lock nuts. Between the tie rod and each tie rod end is a nut that holds it in place. You'll need to loosen this nut with a wrench.
    • Be aware that on some vehicles, the driver's side lock nut may be threaded counterclockwise, while the passenger side is threaded clockwise.[19]
    • Depending on your steering system, there may also be a clamp that needs to be removed at each end to make sure the bellows boot is not sticking to the inner tie rod.[20] Consult your manual for details.
    • If it has been a long time since you had an alignment, the threaded parts may be stubborn and require some lubrication, such as WD40, in order to make them turn.
  3. Image titled Fix the Alignment on a Car Step 16
    3
    Make your adjustments. Depending on the type of steering you have, there are two different ways you can adjust your toe.
    • If you have rack and pinion steering, you should turn the inner tie rod itself. Spinning the rod will adjust the toe in or out.[21]
    • If you have a parallelogram linkage system, there will be adjusting sleeves that you can turn to adjust your toe. These sleeves can be damaged by this process, so be careful. There are special tools for rotating tie rods which can prevent damage.[22]
    • Whichever system you have, make sure to keep in mind that the change you are making to the toe will be distributed across two wheels. Each tie rod should be adjusted 1/2 of the total desired amount of change in or out.
  4. Image titled Fix the Alignment on a Car Step 17
    4
    Re-check the toe. Tighten your nuts (and clamps, if applicable) back up. Then, recheck the toe using the same procedures you followed in part 2. Readjust as necessary.
    • Unless you are well practiced at this, there may be a certain amount of trial and error to get this right.
  5. Image titled Fix the Alignment on a Car Step 18
    5
    Test drive the car. Take the car for a drive to verify that any obvious alignment issues have been corrected (e.g. that the car does not pull to one side or vibrate excessively).
    • If your alignment problems persist, you may have a problem that requires a professional mechanic.

Comments

Post a Comment

Popular posts from this blog

गरुड़ पुराण कथा और सार – Garud Puran in Hindi

गरुड़ पुराण कथा और सार – Garud Puran in Hindi गरुड़ पुराण कथा – Garud Puran in Hindi गरुड़ पुराण  हिन्दू धर्म के प्रसिद्ध वेद पुराण में से एक है। वैष्णव सम्प्रदाय से सम्बन्धित गरुण पुराण हिन्दू धर्म में मृत्यु के बाद सद्गति प्रदान करने वाला माना जाता है। इसलिये सनातन हिन्दू धर्म में मृत्यु के बाद ‘गरुड पुराण’ के श्रवण का प्रावधान है। इस पुराण के अधिष्ठातृ देव भगवान विष्णु  हैं। अठारह पुराणों में ‘गरुड़ महापुराण’ का अपना एक विशेष महत्व है। क्योंकि इसके देव स्वयं विष्णु माने जाते हैं, इसीलिए यह वैष्णव पुराण है। गरुड़ पुराण के अनुसार हमारे कर्मों का फल हमें हमारे जीवन में तो मिलता ही है, परंतु मरने के बाद भी कार्यों का अच्छा-बुरा फल मिलता है। इसी वजह से इस ज्ञान को प्राप्त करने के लिए घर के किसी सदस्य की मृत्यु के बाद का अवसर निर्धारित किया गया, ताकि उस समय हम जन्म-मृत्यु से जुड़े सभी सत्य जान सके और मृत्यु वश बिछडऩे वाले सदस्य का दुख कम हो सके। भगवान विष्णु की भक्ति |  Devotion to Lord Vishnu वास्तविक तथ्य यह है कि ‘गरुड़ पुराण’ में भगवान विष्णु ...
3 comments
Read more

What is OLAP (Online Analytical Processing): Cube, Operations & Types

What is OLAP (Online Analytical Processing): Cube, Operations & Types What is Online Analytical Processing? OLAP is a category of software that allows users to analyze information from multiple database systems at the same time. It is a technology that enables analysts to extract and view business data from different points of view. OLAP stands for Online Analytical Processing. Analysts frequently need to group, aggregate and join data. These operations in relational databases are resource intensive. With OLAP data can be pre-calculated and pre-aggregated, making analysis faster. OLAP databases are divided into one or more cubes. The cubes are designed in such a way that creating and viewing reports become easy. In this tutorial, you will learn- What is Online Analytical Processing? OLAP cube Basic analytical operations of OLAP Types of OLAP systems ROLAP MOLAP Hybrid OLAP Advantages of OLAP Disadvantages of OLAP OLAP cube: At the core of the...
Post a Comment
Read more

Communication is simply the act of transferring information from one place, person or group to another.

Communication is simply the act of transferring information from one place, person or group to another. Every communication involves (at least) one sender, a message and a recipient. This may sound simple, but communication is actually a very complex subject. The transmission of the message from sender to recipient can be affected by a huge range of things. These include our emotions, the cultural situation, the medium used to communicate, and even our location. The complexity is why good communication skills are considered so desirable by employers around the world: accurate, effective and unambiguous communication is actually extremely hard. A communication therefore has three parts: the sender, the message, and the recipient. The sender ‘encodes’ the message, usually in a mixture of words and non-verbal communication. It is transmitted in some way (for example, in speech or writing), and the recipient ‘decodes’ it. Of course, there may be more than one recipient, and t...
Post a Comment
Read more